Raised in a day. Built over a winter.
We cut every joint by hand in our shop through the winter. In spring we bring the frame to your land and raise it with you and your neighbors in a single day.
Scroll down to watch one go up.
It starts with forty-eight trees.
Douglas fir from within thirty miles of the shop, sawn square and stacked to dry. The trees with the tightest rings become posts.
Every joint is cut by hand.
A tenon on one timber slides into a mortise cut in the next. We fit each pair in the shop, then scribe the same Roman numeral on both so they find each other again on raising day.
The sills go down first.
Heavy timbers on stone piers, leveled to an eighth of an inch, then the deck. Everything else stands on these.
Raising day.
Each cross frame, called a bent, is pinned together flat on the deck. Then everyone lifts, starting at the back. A barn this size has four bents, and each one goes up in a few minutes.
Pegs, not nails.
Plates and girts tie the bents together, and oak pegs pull every joint tight. No metal holds this frame together.
Rafters by afternoon.
Fourteen rafters, two purlins, and a ridge. With a good crew, the roof frame is up before the light goes.
A tree on top, for luck.
When the last rafter is pegged, a fir bough goes on the peak. It’s an old framer’s custom. Then everyone eats.